2x Turnigy nano-tech 950mAh 2S 25C-50C Battery Lipo Blade 200QX CX2 EFLB8002SJ

2

New

Turnigy Nano-Tech

950mah 2S 25C-50C

High Power Lipo Battery with

JST Connector.

In Stock, US Seller, Fast Shipment

Almost an exact replacement for the EFLB8002SJ, Almost 20% more capacity only 1g heavier and 1mm x 1mm larger. 

Snug fit but works will in the Blade CX/CX2 and Blade 200QX.

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. 
Excellent news for 3D pilots!
 
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Spec.
Capacity: 950mAh
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 25C Constant / 50C Burst
Weight: 46g (including wire, plug & case)
Dimensions: 71x25x14mm
Balance Plug: JST-XH
Discharge Plug: mini-JST

* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 
1) The nanometer conductive additives form ultra strong electron-conducting networks in the electrodes which can increase electronic conductivity. 
2) These additives create a super strong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. 
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries.
Power density reaches 7.5 kw/kg.
Less Voltage sag during high rate discharge, giving more power under load.
Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
Greater thermal control, pack usually doesn't exceed 60degC
Thickness swelling during heavy load doesn't exceed 5%, compared to 15% of a normal Lipoly during heavy load.
Higher capacity during heavy discharge. More than 90% at 100% C rate.
Fast charge capable, up to 15C on some batteries.
Longer Cycle Life, almost double that of standard lipoly technology.