2X VANT 3S 11.1V 5200mAh 50C Lipo Battery Pack w EC5 ARRMA POWERHOBBY LECTRON
2 PACK LISTING
- Virtually all 1/10 Scale Vehicles. Most batteries are about 25mm in height.
*Note that due to the ~26mm height of the battery, an extended battery strap may be needed for some vehicles.
- Stampede VXL requires about 1-2mm of Washers/Spacers installed under the ESC Tray to allow room for the ~26mm battery height.
- 1/8 Scale Vehicles that accept up to 6S LiPo batteries. Run 2 of these batteries in series to achieve 6S power!
- Please check with your Speed Control's manual to determine if it can accept 11.1V batteries.
- Use the size specifications below to determine if this battery will fit your application.
Voltage: 3S / 3 Cell / 11.1v
Discharge Rate: 50C Constant (260A) / 100C Burst (10 sec) (520A)
Charge Rate: 2C (10.0A)
Watt Hours: 55.50Wh
Weight: 11.6 oz / 329.0g (including wire, plug & casing)
Dimensions LxWxH: 135.5 x 43.5 x 26.0 mm
Dimensions w/ Wires folded at end of pack: 139.5 x 43.5 x 26.0 mm
*Note that dimensions may vary by ± ~1mm.
Discharge Plug: EC5 Connector Plug (IC5 Compatible)
Balance Plug: JST-XH