use code "chicago10" and save 10% off your order plus Free Shipping
Please choose your desired connector from the drop down menu if needed.
Vant Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. Vant Batteries go through strict testing and quality control procedures in order to provide extremely accurate mAh, Voltage, and C ratings. Don’t let their low cost fool you, these batteries outperform major manufacturers batteries!!
This is an OEM replacement battery for the Traxxas 2872 battery. It has the same Voltage, a Higher mAh Rating and similar Size. It also has a much higher C-Rating for more power output and better motor response.
True Capacity and C-Rating
Thick 12AWG Discharge Leads
Traxxas High Current Style Connector
JST-XH Balance connector
Virtually all 1/10 Scale Vehicles such as Traxxas Bandit VXL, Rustler VXL, Stampede VXL*, Slash VXL*, Slash 4×4*, E-Maxx Brushless*, E-Revo Brushless, etc. that accept 11.1V batteries. Most batteries are about 25mm in height. *Note that due to the ~26mm height of the battery, an extended battery strap may be needed for some vehicles.
Stampede VXL requires about 1-2mm of Washers/Spacers installed under the ESC Tray to allow room for the ~26mm battery height.
1/8 Scale Vehicles that accept up to 6S LiPo batteries. Run 2 of these batteries in series to achieve 6S power!
Please check with your Speed Control’s manual to determine if it can accept 11.1V batteries.
Use the size specifications below to determine if this battery will fit your application.
Capacity: 5200mAh Voltage: 3S / 3 Cell / 11.1v Discharge Rate: 50C Constant (260A) / 100C Burst (10 sec) (520A) Charge Rate: 2C (10.0A) Watt Hours: 55.50Wh Weight: 11.6 oz / 329.0g (including wire, plug & casing) Dimensions LxWxH: 133.5 x 43.5 x 26.0 mm Dimensions w/ Wires folded at end of pack: 137.5 x 43.5 x 26.0 mm *Note that dimensions may vary by ± ~1mm. Discharge Plug: Traxxas High Current Style Connector Balance Plug: JST-XH
choosing a selection results in a full page refresh